Babaamaajimowinan (Telling of news in different places)

Flushing of Fire Hydrants/Water Mains During the week of June 13 – 17, 2011

During the week of June 13 – 17, 2011 throughout the Red Lake, Redby and Littlerock Communities, June 13 – 15, 2011, and also the Ponemah Community, June 16 – 17, 2011 the flushing of fire hydrants/water mains will take place. The Sanitation Department will try to have the flushing completed by June 17, 2011, weather permitting, or by June 24, 2011 if the weather is considered unsafe. The Red Lake Fire Department will assist in flushing the water main systems.

If you have any questions, please call Red Lake Sanitation at 218-679-3377. This process may cause some temporary discoloration of your water. To remove this discoloration, please turn on several faucets in or outside your home or business, and leave the water run until it clears.

Hydrant Flushing and Waterline Maintenance, you may notice Water Department crews working at fire hydrants and see water running down the street. Your first thought may be that we are ignoring our own philosophy of conserving water. Normally in the spring, we flush water lines through the use of fire hydrants, which is an important preventive maintenance activity. Although it may appear to waste water, the process is part of a routine maintenance program necessary to maintain the integrity of the water system allowing us to continue to deliver the highest quality water possible to our customers. As a result of the line flushing process, residents in the immediate vicinity of the work may experience temporary discoloration of their water. This discoloration consists primarily of harmless silt and air and does not affect the safety of the water. If you experience discoloration in your water after crews have been flushing in your neighborhood, clear the pipes in your home by running all water

faucets for a few minutes. The same philosophy of water line preventive maintenance is one that you should use in your own home to ensure the quality of water inside your home. Your home’s water heater should be drained and flushed on a regular basis, according to manufacturers’ recommendations, to keep it working effectively and efficiently.

FREQUENTLY ASKED QUESTIONS

Q: Why does the water system need to be routinely flushed?

A: The city’s water distribution system is a complex network of pipes and storage reservoirs where sediment or deposits may naturally accumulate over time. If not removed, these materials may cause water quality deterioration, taste and odor problems, or discoloration of the water. Water may also stagnate in lesser used

parts of the distribution system. This can result in degraded water quality.

Q. Is the Water Department the only ones that flush the lines?

A. No, Fire Departments are required to flush hydrants when they are testing hydrants to make sure adequate flow

and pressure is available.

Q. What should I do after the flushing?

A. If the tap water is used during flushing, it could come out full of sediment and discoloration. If you encounter discolored water, shut the water off and wait several minutes. After waiting, check the clarity by running cold water for a few minutes allowing new water to work its way into your pipes. If not, wait a few more minutes and check again. In some cases, you may experience slight discoloration for a few hours. This discoloration only affects the appearance of the water; it does not affect the taste or water quality.

Q. What should I do if my water pressure or volume seems low after flushing?

A. Check your faucet and washer screens for trapped debris.

Q. Why does the water look funny after hydrant flushing?

A. When a hydrant is opened, there will always be temporary incidences of discolored water containing fine sediment particles. There is no health hazard associated with discolored water. Allow a few hours for discoloration to dissipate. To verify the water has settled, allow your cold water tap to run a few minutes. If the discoloration persists for more than twenty- four (24) hours, please contact our Department at 218/679-3377.

Q. Is it OK to drink sediment-laden or discolored water during temporary disturbance events?

A. It is recommended that water users wait until the water has cleared before using it for potable purposes.

Q. How is the flushing program related to hydrant testing by the fire departments?

A. The Red Lake and Ponemah Fire Departments, supported by our water system, also conducts routine “flow testing” of fire hydrants. This is an important effort toward ensuring hydrant effectiveness for fire control purposes. Such testing is a separate effort independent from the Water Department flushing program and assists us with knowing if our fire hydrants are working properly.

Mii gwech! Thank you!

 

Reader Comments(0)

 
 
Rendered 03/26/2024 06:08